SiteMap | Contact Us
Home : Model Specifications : DCA 1400/DCA 1400 WH Series Dehumidifiers
Subscribe to E-Bulletins

DCA 1400/DCA 1400 WH Series Dehumidifiers

Performance
Features
  • MET Laboratory Safety Listed To UL 1995
  • 3 Year Parts Warranty
  • Remote Condenser Ready
  • Rifle Tube Refrigeration Coils
  • Copeland Scroll Compressor
  • Stainless Steel Condensate Drain Pan
  • Low Ambient Head Pressure Control
  • Powder Coated, Galvannealed Steel Cabinets
  • TEFC Blower Motor
  • Many Control Systems Available
  • Many Make Up Air Provisions Available
  • Water Cooled Condenser For Water Heating Or A/C Available
  • Many Other Options Available

Performance 82DB / 50% R.H. 82DB / 60% R.H. Notes
Moisture Removal LB/HR 13.7 17.3 1
Sensible Cooling, MBH 21.3 19.4 2
Net Reheat, MBH 23.3 27.5 3
Water Heating MBH 45.5 47.7 4
Notes:
1. Reheat mode assuming 1050 BTU/lb.
2. Cooling mode with remote air cooled condenser at 95F ambient.
3. Defined as sum of latent and compressor input. Use Dehumidifier for supplemental heat only.
4. Assuming 80F entering water temperature.
5. For conditions and data not shown contact the factory.

zspace
Diagrams

zspace
Physical Dimensions

  DCA1400 DCA1400WH   DCA1400 DCA1400WH   DCA1400 DCA1400WH
A 57 1/2 57 1/2 G 10 3/4 10 3/4 M 3 1/8 5
B 32 3/8 40 3/8 H 25 25 N 7 7
C 30 1/2 30 1/2 I 25 1/8 25 1/8 O 2 10
D 13 1/4 13 1/4 J 6 6 - - -
E 11 1/4 11 1/4 K 1 3/4 1 3/4 - - -
F 5 10 1/4 L 8 8 - - -

zspace
Design Specifications
Electrical 208/230V   208/230V   460V   575V  
Phase/Hz 1/60 3/60 3/60 3/60
Compressor B.T.U. 36,500 36,500 36,500 36,500
Compressor RLA 18.4 11.4 5.7 4.7
Compressor LRA 95 77 39 31
Blower Motor H.P. 1.0 1.0 1.0 1.0
Blower Motor FLA 6.4 3.6 1.8 1.4
Unit FLA 26.2 16.4 8.2 6.7
Maximum Fuse Size 40 25 12 10
Minimum Circuit Ampacity 30.8 19.3 9.6 7.9
Operating kW 3.75 3.67 3.67 3.64
M.R. (82°F/50%): 13.7 lbs./Hr. Drain Connection: 1" Bar Drain
M.R. (82°F/60%): 17.3 lbs./Hr. DCA1400 Weight: 600 lbs.
CFM: 1450 DCA1400WH Weight: 710 lbs.
External Static Pressure: 0.50" H2O Water Inlet O.D.: 7/8"
Refrigerant: R-22 (Factory Charged - 20 lbs.) Water Outlet O.D.: 7/8"
Compressor Type: Scroll Water Flow G.P.M.: 5.0
Filter: 1" Fiberglass Pressure Drop (Ft. Wc): 4.0
Above data based on 50% RH + Return Air 82°F and Pool Water at 80°F

Other Information
Options: (Consult Factory)
- Right Side Component Access
- Top or Bottom Discharge
- Extended Surface Filters 2" & 4"
- Outdoor Installation Package
- Outdoor Air Assembly with Damper & Filter Make Up
- External Static Upgrade
- Heresite Coated Coils
 
- Motorized Bypass Damper
- Remote Ready Delete
- Defrost Timer Package
- Other
CAUTIONS: The reheat capacity rating includes latent recovery and heat of compression.
It is recommended that dehumidifiers be used for supplemental heat only.

The cooling capacity is based on an ambient temperature of 95°F.
As outside conditions vary, so will the performance of the dehumidifier.

Ratings are subject to change without notice.

Back to Top


Home | What's New! | Commercial/Industrial | Swimming Pool | Applications | Replacement Dehumidifiers
Tech Support | Freight Tracking | Rep/Career Opps | About Us | News & Resources | Contact Us | Free Analysis


Dehumidifier Corporation of America
W53 N550 Highland Drive - P.O. Box 917
Cedarburg, WI 53012
(262) 377-7501 - Fax: (262) 377-7502
Toll Free: 1-888-883-7602
The Industry's Quality Value Leader.    
Copyright © Dehumidifier Corporation of America
All Rights Reserved. Privacy Statement

For more information on Swimming Pool Dehumidifiers, please see www.HealthyPoolRooms.com