SiteMap | Contact Us
Home : Model Specifications : DCA 3500/DCA 3500 WH Series Dehumidifiers
Subscribe to E-Bulletins
DCA 3500/DCA 3500 WH Series Dehumidifiers

Performance | Features | Diagrams | Physical Dimensions

Design Specifications | Other Information

 Printable PDF
Performance
Features
  • MET Laboratory Safety Listed To UL 1995
  • 3 Year Parts Warranty
  • Single Refrigeration Circuit
  • Dual Copeland Scroll Compressors
  • Motorized Evaporator By-Pass Control
  • Powder Coated, Galvannealed Steel
  • Low Ambient Head Pressure Control
  • Remote Condenser Ready Cabinets
  • Rifle Tube Refrigeration Coils
  • TEFC Blower Motor
  • Stainless Steel Condensate Drain Pan
  • Standard Microprocessor Control System
  • Water Cooled Condenser For Water Heating Or A/C Available
  • Many Other Options Available

Performance 82DB / 50% R.H. 82DB / 60% R.H. Notes
Moisture Removal LB/HR 32.9 41.6 1
Sensible Cooling, MBH 51.3 46.7 2
Net Reheat, MBH 56.2 66.2 3
Water Heating MBH 109.6 114.9 4
Notes:
1. Reheat mode assuming 1050 BTU/lb.
2. Cooling mode with remote air cooled condenser at 95.
3. Defined as sum of latent and compressor input. Use Dehumidifier for supplemental heat only.
4. Assuming 80F entering water temperature.
5. For conditions and data not shown contact the factory.

zspace
Diagrams

zspace
Physical Dimensions

  DCA3500 DCA3500WH   DCA3500 DCA3500WH   DCA3500 DCA3500WH
A 66 71 G 3 4 M 5 5
B 45 55 1/4 H 40 50 N 8 1/2 8 1/2
C 34 1/2 49 I 25 1/8 40 1/4 O 6 4
D 18 5/8 18 5/8 J 4 4 - - -
E 16 16 K 5 1/2 2 - - -
F 7 7 L 12 13 - - -

zspace
Design Specifications
Electrical 208/230V
Phase/Hz 1/60
Compressor B.T.U. 92,400
Compressor RLA 2 x 26.42
Compressor LRA 2 x 129
Blower Motor H.P. 2.0
Blower Motor FLA 10.0
Unit FLA 64.3
Maximum Fuse Size 90
Minimum Circuit Ampacity 70.9
Operating kW 8.76
M.R. (82°F/50%): 32.9 lbs./Hr. Drain Connection: 1" Bar Drain
M.R. (82°F/60%): 41.7 lbs./Hr. DCA3500 Weight: 1250 lbs.
CFM: 3500 DCA3500WH Weight: 1350 lbs.
External Static Pressure: 0.50" H2O Water Inlet O.D.: 1 3/8"
Refrigerant: R-22 (Factory Charged - 40 lbs.) Water Outlet O.D.: 1 3/8"
Compressor Type: Scroll Water Flow G.P.M.: 15.0
Filter: 1" Fiberglass Pressure Drop (Ft. Wc): 8.2
Above data based on 50% RH + Return Air 82°F and Pool Water at 80°F

Other Information
Options: (Consult Factory)
- Right Side Component Access
- Top or Bottom Discharge
- Extended Surface Filters 2" & 4"
- Outdoor Installation Package		 - Outdoor Air Assembly with Damper & Filter Make Up
- External Static Upgrade
- Heresite Coated Coils
 		 - Motorized Bypass Damper
- Remote Ready Delete
- Defrost Timer Package
- Other
CAUTIONS: The reheat capacity rating includes latent recovery and heat of compression.
It is recommended that dehumidifiers be used for supplemental heat only.

The cooling capacity is based on an ambient temperature of 95°F.
As outside conditions vary, so will the performance of the dehumidifier.

Ratings are subject to change without notice.

Back to Top


Home | What's New! | Commercial/Industrial | Swimming Pool | Applications | Replacement Dehumidifiers
Tech Support | Freight Tracking | Rep/Career Opps | About Us | News & Resources | Contact Us | Free Analysis


Dehumidifier Corporation of America
W53 N550 Highland Drive - P.O. Box 917
Cedarburg, WI 53012
(262) 377-7501 - Fax: (262) 377-7502
Toll Free: 1-888-883-7602
 The Industry's Quality Value Leader.    
Copyright © Dehumidifier Corporation of America
All Rights Reserved. Privacy Statement

For more information on Swimming Pool Dehumidifiers, please see www.HealthyPoolRooms.com