|
DCA 500/DCA 500 WH Series Dehumidifiers
Performance |
 |
 |
 |
Features
- MET Laboratory Safety Listed To UL 1995
- 3 Year Parts Warranty
- Remote Condenser Ready
- Rifle Tube Refrigeration Coils
- Copeland Scroll Compressor
- Stainless Steel Condensate Drain Pan
- Low Ambient Head Pressure Control
- Powder Coated, Galvannealed Steel Cabinets
- TEFC Blower Motor
- Many Control Systems Available
- Many Make Up Air Provisions Available
- Water Cooled Condenser For Water Heating Or A/C Available
- Many Other Options Available
|
| Performance |
82DB / 50% R.H. |
82DB / 60% R.H. |
Notes |
| Moisture Removal LB/HR |
6.7 |
8.5 |
1 |
| Sensible Cooling, MBH |
10.4 |
9.5 |
2 |
| Net Reheat, MBH |
11.4 |
13.4 |
3 |
| Water Heating MBH |
22.2 |
23.3 |
4 |
|
Notes:
1. Reheat mode assuming 1050 BTU/lb.
2. Cooling mode with remote air cooled condenser at 95F ambient.
3. Defined as sum of latent and compressor input. Use Dehumidifier for supplemental heat only.
4. Assuming 80F entering water temperature.
5. For conditions and data not shown contact the factory. |
Diagrams |
 |
 |
| |
DCA500 |
DCA500WH |
|
DCA500 |
DCA500WH |
|
DCA500 |
DCA500WH |
| A |
50 1/2 |
57 1/2 |
G |
11 |
11 |
M |
3 1/8 |
3 1/8 |
| B |
32 3/8 |
32 3/8 |
H |
20 |
20 |
N |
5 |
5 |
| C |
30 1/2 |
30 1/2 |
I |
20 1/8 |
20 1/8 |
O |
6 |
6 |
| D |
9 1/4 |
9 1/4 |
J |
11 |
11 |
- |
- |
- |
| E |
10 3/8 |
10 3/8 |
K |
4 1/4 |
4 1/4 |
- |
- |
- |
| F |
7 |
7 |
L |
8 |
8 |
- |
- |
- |
Design Specifications |
| Electrical |
|
208/230W |
| Phase/Hz |
|
1/60 |
| Compressor B.T.U. |
|
18,100 |
| Compressor RLA |
|
10.7 |
| Compressor LRA |
|
45 |
| Blower Motor H.P. |
|
0.5 |
| Blower Motor FLA |
|
4.4 |
| Unit FLA |
|
16.5 |
| Maximum Fuse Size |
|
25 |
| Minimum Circuit Ampacity |
|
19.2 |
| Operating kW |
|
2.24 |
|
| M.R. (82°F/50%): 6.7 lbs./Hr. |
Drain Connection: 1" Bar Drain |
| M.R. (82°F/60%): 8.5 lbs./Hr. |
DCA500 Weight: 425 lbs. |
| CFM: 550 |
DCA500WH Weight: 525 lbs. |
| External Static Pressure: 0.50" H2O |
Water Inlet O.D.: 5/8" |
| Refrigerant: R-22 (Factory Charged - 10 lbs.) |
Water Outlet O.D.: 5/8" |
| Compressor Type: Scroll |
Water Flow G.P.M.: 2.0 |
| Filter: 1" Fiberglass |
Pressure Drop (Ft. Wc): 2.8 |
| Above data based on 50% RH + Return Air 82°F and Pool Water at 80°F |
|
Other Information |
| Options: (Consult Factory) |
- Right Side Component Access
- Top or Bottom Discharge
- Extended Surface Filters 2" & 4"
- Outdoor Installation Package |
- Outdoor Air Assembly with Damper & Filter Make Up
- External Static Upgrade
- Heresite Coated Coils
|
- Motorized Bypass Damper
- Remote Ready Delete
- Defrost Timer Package
- Other
|
CAUTIONS: The reheat capacity rating includes latent recovery and heat of compression.
It is recommended that dehumidifiers be used for supplemental heat only.
The cooling capacity is based on an ambient temperature of 95°F.
As outside conditions vary, so will the performance of the dehumidifier.
ALL PRINTED INFORMATION SHOWN SUBJECT TO CHANGE WITHOUT NOTICE |
Back to Top
|
|
Printable PDF
){kind=link}
){kind=link}