SiteMap | Contact Us
Home : Model Specifications : DCA 8000/DCA 8000 WH Series Dehumidifiers
Subscribe to E-Bulletins

DCA 8000/DCA 8000 WH Series Dehumidifiers

Performance
DCA 8000/DCA 8000 WH Series Dehumidifiers DCA 8000/DCA 8000 WH Series Dehumidifiers
DCA 8000/DCA 8000 WH Series Dehumidifiers Features
  • MET Laboratory Safety Listed To UL 1995
  • 3 Year Parts Warranty
  • Dual Refrigeration Circuit Construction
  • Dual Copeland Scroll Compressors
  • Motorized Evaporator By-Pass Control
  • Low Ambient Head Pressure Control
  • Rifle Tube Refrigeration Coils
  • TEFC Blower Motor
  • Stainless Steel Condensate Drain Pan
  • Standard Microprocessor Control System
  • Water Cooled Condenser For Water Heating Or A/C Available
  • Many Other Options Available
    room heating while dehumidifying (see specifications).

Performance 82DB / 50% R.H. 82DB / 60% R.H. Notes
Moisture Removal LB/HR 80.0 101.2 1
Sensible Cooling, MBH 124.8 113.6 2
Net Reheat, MBH 137.0 161.0 3
Water Heating - A, MBH 133.2 139.7 4,6
Water Heating - B, MBH 133.2 139.7 4,6
Notes:
1. Reheat mode assuming 1050 BTU/lb.
2. Cooling mode with remote air cooled condenser at 95°F ambient.
3. Defined as sum of latent and compressor input. Use Dehumidifier for supplemental heat only.
4. Assuming 80°F entering water temperature.
5. For conditions and data not shown contact the Factory.
6. For pool water usually only circuit A is required.

zspace
Diagrams

zspace
Physical Dimensions

DCA8000
A 97 G 36 M 5
B 55 1/4 H 50 N 10 1/2
C 69 I 60 1/4 - -
D 22 J 4 - -
E 19 K 5 - -
F 11 L 13 - -

zspace
Design Specifications
Electrical 208/230V 460V 575V
Phase/Hz 3/60 3/60 3/60
Compressor M.B.H. A/B 108/108 108/108 108/108
Compressor RLA A/B 34.3/34.3 17.5/17.5 13.2/13.2
Compressor LRA A/B 232/232 125/125 148/148
Blower Motor H.P. 5.0 5.0 5.0
Blower Motor FLA 13.4 6.7 5.4
Unit FLA 83.3 42.7 32.7
Maximum Fuse Size 110 60 45
Minimum Circuit Ampacity 92.4 47.1 36.0
Operating kW 19.7 19.7 19.7
CFM: 8000 DCA8000 Weight: 3000 lbs.*
External Static Pressure: 0.50" H2O Water Inlet O.D. A/B: 1.375/1.375
Refrigerant: R-22 Charge A/B 65lbs/65lbs Water Outlet O.D. A/B: 1.375/1.375
Compressor Type: Scroll Water Flow G.P.M. A/B: 17.0/17.0
Filter 6 Each: 25" x 25" x 4" pleated Pressure Drop (Ft. Wc) A/B: 6.7/6.7
Drain Connection: 1" Bar Drain  
* Weight shown is for basic unit with no options. Contact factory for weight with options needed.
Above data based on 50% RH + Return Air 82°F and Pool Water at 80°F

Other Information
Options: (Consult Factory)
- Right Side Component Access
- Top or Bottom Discharge
- Extended Surface Filters 2" & 4"
- Outdoor Installation Package
- Outdoor Air Assembly with Damper & Filter Make Up
- External Static Upgrade
- Heresite Coated Coils
 
- Motorized Bypass Damper
- Remote Ready Delete
- Defrost Timer Package
- Other
CAUTIONS: The reheat capacity rating includes latent recovery and heat of compression.
It is recommended that dehumidifiers be used for supplemental heat only.

The cooling capacity is based on an ambient temperature of 95°F.
As outside conditions vary, so will the performance of the dehumidifier.

Ratings are subject to change without notice.

Back to Top


Home | What's New! | Commercial/Industrial | Swimming Pool | Applications | Replacement Dehumidifiers
Tech Support | Freight Tracking | Rep/Career Opps | About Us | News & Resources | Contact Us | Free Analysis


Dehumidifier Corporation of America
W53 N550 Highland Drive - P.O. Box 917
Cedarburg, WI 53012
(262) 377-7501 - Fax: (262) 377-7502
Toll Free: 1-888-883-7602
The Industry's Quality Value Leader.    
Copyright © Dehumidifier Corporation of America
All Rights Reserved. Privacy Statement

For more information on Swimming Pool Dehumidifiers, please see www.HealthyPoolRooms.com