Dehumidifier Corporation of America



DCA 900/DCA 900 WH Series Dehumidifiers

Performance

Features

  • MET Laboratory Safety Listed To UL 1995
  • 3 Year Parts Warranty
  • Remote Condenser Ready
  • Rifle Tube Refrigeration Coils
  • Copeland Scroll Compressor
  • Stainless Steel Condensate Drain Pan
  • Low Ambient Head Pressure Control
  • Powder Coated, Galvannealed Steel Cabinets
  • TEFC Blower Motor
  • Many Control Systems Available
  • Many Make Up Air Provisions Available
  • Water Cooled Condenser For Water Heating Or A/C Available
  • Many Other Options Available

Performance 82DB / 50% R.H. 82DB / 60% R.H. Notes
Moisture Removal LB/HR 9.1 11.5 1
Sensible Cooling, MBH 14.2 12.9 2
Net Reheat, MBH 15.5 18.3 3
Water Heating MBH 30.2 31.7 4
Notes:
1. Reheat mode assuming 1050 BTU/lb.
2. Cooling mode with remote air cooled condenser at 95F ambient.
3. Defined as sum of latent and compressor input. Use Dehumidifier for supplemental heat only.
4. Assuming 80F entering water temperature.
5. For conditions and data not shown contact the factory.

zspace

Diagrams


zspace

Physical Dimensions


  DCA900 DCA900WH   DCA900 DCA900WH   DCA900 DCA900WH
A 57 1/2 57 1/2 G 10 3/4 10 3/4 M 3 1/8 5
B 32 3/8 40 3/8 H 25 25 N 5 5
C 30 1/2 30 1/2 I 25 1/8 25 1/8 O 2 10
D 13 1/4 13 1/4 J 6 6 - - -
E 11 1/4 11 1/4 K 1 3/4 1 3/4 - - -
F 5 10 1/4 L 8 8 - - -

zspace

Design Specifications

Electrical 208/230V 208/230V 460V
Phase/Hz 1/60 3/60 3/60
Compressor B.T.U. 24,500 24,500 24,500
Compressor RLA 13.6 8.6 4.3
Compressor LRA 61 55 27
Blower Motor H.P. 0.5 0.5 0.5
Blower Motor FLA 4.4 2.0 1.0
Unit FLA 19.4 12.0 6.0
Maximum Fuse Size 30 20 10
Minimum Circuit Ampacity 22.8 14.2 7.0
Operating kW 2.57 2.52 2.52
M.R. (82°F/50%): 9.1 lbs./Hr. Drain Connection: 1" Bar Drain
M.R. (82°F/60%): 11.5 lbs./Hr. DCA900 Weight: 550 lbs.
CFM: 950 DCA900WH Weight: 690 lbs.
External Static Pressure: 0.50" H2O Water Inlet O.D.: 5/8"
Refrigerant: R-22 (Factory Charged - 18 lbs.) Water Outlet O.D.: 5/8"
Compressor Type: Scroll Water Flow G.P.M.: 4.0
Filter: 1" Fiberglass Pressure Drop (Ft. Wc): 7.0
Above data based on 50% RH + Return Air 82°F and Pool Water at 80°F

Other Information

Options: (Consult Factory)
- Right Side Component Access
- Top or Bottom Discharge
- Extended Surface Filters 2" & 4"
- Outdoor Installation Package
- Outdoor Air Assembly with Damper & Filter Make Up
- External Static Upgrade
- Heresite Coated Coils
 
- Motorized Bypass Damper
- Remote Ready Delete
- Defrost Timer Package
- Other
CAUTIONS: The reheat capacity rating includes latent recovery and heat of compression.
It is recommended that dehumidifiers be used for supplemental heat only.

The cooling capacity is based on an ambient temperature of 95°F.
As outside conditions vary, so will the performance of the dehumidifier.

ALL PRINTED INFORMATION SHOWN SUBJECT TO CHANGE WITHOUT NOTICE

Back to Top









Home | Swimming Pool Dehumidifiers | Commercial/Industrial Dehumidifiers | 100% Outdoor Air Dehumidifiers | Accessories
Replacement Dehumidifiers | Customer Support | About Us | Contact Us | SiteMap
commercial dehumidifiers Dehumidifier Corporation of America
W53 N550 Highland Drive
Cedarburg, WI 53012
Phone: 262-377-7501
Fax: 262-377-7502
Toll Free: 1-888-883-7602